Victron Centaur Charger - 12 VDC - 40AMP - 3-Bank - 120-240 VAC

In stock
SKU
82830
$471.75
Victron Centaur Charger 40Amp 12/40(3) 120-240V

Centaur Charger - 12 VDC - 40AMP - 3-Bank - 120-240 VAC

Features:

  • Quality without compromise -  Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.
  • Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. 
  • The chargers also accept a 90-400 V DC supply. 
  • Three outputs that each can supply the full output current Three isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current. 
  • Three-stage charging, with temperature compensation The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries

 

Additional Specs (If Applicable):

  • Charger Input - Voltage = 90-265v
  • Portable = No
  • Charging Banks = 3
  • Charger Output Voltage = 12v
  • Charger Output - Amps = 40a
More Information
MFG Part Number CCH012040000
upc 8719076021490
Write Your Own Review
You're reviewing:Victron Centaur Charger - 12 VDC - 40AMP - 3-Bank - 120-240 VAC
Copyright © 2023-Douglas Supply LLC. All rights reserved.